[j-nsp] GRE on MX960

[Saku Ytti]

Hey Alex,

DPC(E) needs to spend entire PFE for tunneling, all front-plate ports
on that PFE will be disabled.

MPC can do tunneling without dedicating PFE for it.

I'm sure it's documented somewhere.

On Mon, 31 Dec 2018 at 17:14, Alex Martino via juniper-nsp
<juniper-nsp at puck.nether.net> wrote:
>
> Hi,
>
> I need to configure a GRE tunnel between two MX960 (configuration is RE-S-2000, MX-SCB, DPCE 4x 10GE R and DPCE 40x 1GE R). The 10G is fpc 0 and 1G is fpc 1.
>
> I wonder if this is even supported?
>
> When I configure the chassis fpc 0 pic 0-3 tunnel-services bandwidth 10g, the router drop traffic on all interfaces. The same configuration on fpc 1 pic 0-3 seems to work.
>
> Is there a trick or something to be aware of?
>
> Thanks,
> Alex
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp



-- 
  ++ytti