[j-nsp] GRE on MX960
Alex Martino
Alex.martino at protonmail.com
Mon Dec 31 11:24:45 EST 2018
Thank you Saku, that make sense then.
Thanks,
Alex
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Monday, 31 December 2018 16:58, Saku Ytti <saku at ytti.fi> wrote:
> Hey Alex,
>
> DPC(E) needs to spend entire PFE for tunneling, all front-plate ports
> on that PFE will be disabled.
>
> MPC can do tunneling without dedicating PFE for it.
>
> I'm sure it's documented somewhere.
>
> On Mon, 31 Dec 2018 at 17:14, Alex Martino via juniper-nsp
> juniper-nsp at puck.nether.net wrote:
>
> > Hi,
> > I need to configure a GRE tunnel between two MX960 (configuration is RE-S-2000, MX-SCB, DPCE 4x 10GE R and DPCE 40x 1GE R). The 10G is fpc 0 and 1G is fpc 1.
> > I wonder if this is even supported?
> > When I configure the chassis fpc 0 pic 0-3 tunnel-services bandwidth 10g, the router drop traffic on all interfaces. The same configuration on fpc 1 pic 0-3 seems to work.
> > Is there a trick or something to be aware of?
> > Thanks,
> > Alex
> >
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>
> --
>
> ++ytti
More information about the juniper-nsp
mailing list