[j-nsp] Segment Routing Real World Deployment (was: VPC mc-lag)

Mark Tinka mark.tinka at seacom.mu
Mon Jul 9 06:54:10 EDT 2018



On 9/Jul/18 11:58, adamv0025 at netconsultings.com wrote:

> That is faulty fibre causes BGP session problems but not targeted-LDP
> session problems? 

Faulty fibre will affect any control plane sessions.

I think what Alexandre was trying to say is that troubleshooting the
network where issues could be fibre-related is easier with LDP than with
BGP, because with BGP, you now have to check iBGP sessions, routing
policies (if you have them), BGP routing tables, e.t.c. This could
divert your attention for longer than is necessary before you realize
the fibre could be the issue.

Mark.


More information about the juniper-nsp mailing list