[j-nsp] Juniper annoyance... Migration from MX104 to MX960 - inet6 lo0 firewall issue

[Diogo Montagner]

Without seeing the error, we can’t even guess.

Did you copy/paste ? If yes, there may be some hidden rubbish characters
that are causing the problem.

Try this:

On mx104: show conf firewall family inet6 ff-name | save ff-filename

Then ftp the file to mx960 and:
configure private
load merge ff-filename
commit

Please, post the error message ( with commit | display details ).

Thanks

On Tue, 10 Jul 2018 at 05:59, Alain Hebert <ahebert at pubnix.net> wrote:

>      Pretty basic box (beside boost in capacity and REs).
>
> MX104 - Junos: 16.1R4-S1.3
>
> MX960 - Junos: 16.1R7.7
>
>      And yet the same "firewall family inet6" "lo0.0 family inet6
> filter-list [ ... ]" from the MX104 refuse to work on the MX960...
>
>      I have yet to find the hidden knot from Juniper about the MX960 and
> RE protect firewalling for inet6.
>
>      PS: Works without issue for IPv4.
>
>
>      Any hints?
>
>
> --
> -----
> Alain Hebert                                ahebert at pubnix.net
> PubNIX Inc.
> 50 boul. St-Charles
> <https://maps.google.com/?q=50+boul.+St-Charles&entry=gmail&source=g>
> P.O. Box 26770     Beaconsfield, Quebec     H9W 6G7
> Tel: 514-990-5911  http://www.pubnix.net    Fax: 514-990-9443
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
-- 
./diogo -montagner
JNCIE-SP 0x41A