[j-nsp] 6PE without family inet6 labeled-unicast

Dan Peachey dan at peachey.co
Sun Jul 22 15:34:37 EDT 2018


Hey,

Other posters are correct... IPv6 routes are not requied, it forwards based
on received label as next hop is already known. Confused myself as I was
distributing full IPv6 table in my lab testing and assumed it was working
because of that, but it's not the case.

Cheers,

Dan


On Sun, 22 Jul 2018 at 20:23, Andrey Kostin <ankost at podolsk.ru> wrote:

> Hi Dan,
>
> Thanks for answering. All routers have family inet6 configured on all
> participating interfaces, because other v6 traffic is forwarded without
> MPLS, so we are safe for that.
>
>
> Kind regards,
> Andrey
>
> Dan Peachey писал 20.07.2018 16:40:
>
> >>
> >  Hi,
> >
> > Presumably the penultimate LSR has the IPv6 iBGP routes? i.e. it
> > knows how
> > to IPv6 route to the destination. The last LSR->LER hop should just
> > be IPv6
> > routed in that case.
> >
> > I've noticed this behaviour before whilst playing with 6PE on lab
> > devices.
> > It would of course break if you were running IPv4 core only.
> >
> > Cheers,
> >
> > Dan
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


More information about the juniper-nsp mailing list