[j-nsp] 6PE without family inet6 labeled-unicast

Aaron Gould aaron1 at gvtc.com
Mon Jul 30 13:37:30 EDT 2018


".... so for traffic load-balancing we change next-hop to anycast loopback
address shared by those two PE and use dedicated LSPs to that IP with
"no-install" for real PE loopback addresses"

Did you have to use this anycast method?... just wondering if bgp
multipathing would've worked in this case also...and if so, why was one
method chose over the other

-Aaron




More information about the juniper-nsp mailing list