[j-nsp] Equipment Labelling

Sweetser, Frank E fs at wpi.edu
Thu May 3 22:07:11 EDT 2018


That should be pretty straightforward to slap together something simple.  Anyone know the actual size of the threaded hole?


Frank Sweetser
Director of Network Operations
Worcester Polytechnic Institute
"For every problem, there is a solution that is simple, elegant, and wrong." - HL Mencken


________________________________
From: juniper-nsp <juniper-nsp-bounces at puck.nether.net> on behalf of Chuck Anderson <cra at WPI.EDU>
Sent: Thursday, May 3, 2018 9:39 AM
To: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] Equipment Labelling

Nice.  That screw hole on the front of the rack ear is screaming for
someone to make a 3D printed label tag.

On Thu, May 03, 2018 at 08:19:59AM -0500, Chris Wopat wrote:
> Our current QFX5100 label method:
>
> https://i.imgur.com/kRVojXk.jpg
>
> We have a label on both the left and right side, sticking out as a tab on
> left and folded over on right. in both cases the label was adhered prior to
> putting the ears on.
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp


More information about the juniper-nsp mailing list