[j-nsp] Equipment Labelling

[Chuck Anderson]

We think a M3.5-.07 is the right screw, but a 6-32 fits well enough as well.

On Sat, May 05, 2018 at 10:31:23PM +0000, Sweetser, Frank E wrote:
> So after a few rounds of design, Chuck and I came up with this simple bracket that mounts onto the threaded stud in the middle of the mounting brackets for many (all?) of the 1U EX and QFX switches:
> 
> 
> https://www.thingiverse.com/thing:2893741
> 
> 
> If you've got a 3D printer handy, this should give you an 18mm by 40mm space for labelling.  If you don't have a 3D printer handy, now's your chance to convince your boss to buy one for work purposes 😉
> 
> 
> Frank Sweetser
> Director of Network Operations
> Worcester Polytechnic Institute
> "For every problem, there is a solution that is simple, elegant, and wrong." - HL Mencken
> 
> 
> ________________________________
> From: juniper-nsp <juniper-nsp-bounces at puck.nether.net> on behalf of Sweetser, Frank E <fs at WPI.EDU>
> Sent: Thursday, May 3, 2018 10:07 PM
> To: Anderson, Charles R; juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] Equipment Labelling
> 
> That should be pretty straightforward to slap together something simple.  Anyone know the actual size of the threaded hole?
> 
> 
> Frank Sweetser
> Director of Network Operations
> Worcester Polytechnic Institute
> "For every problem, there is a solution that is simple, elegant, and wrong." - HL Mencken
> 
> 
> ________________________________
> From: juniper-nsp <juniper-nsp-bounces at puck.nether.net> on behalf of Chuck Anderson <cra at WPI.EDU>
> Sent: Thursday, May 3, 2018 9:39 AM
> To: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] Equipment Labelling
> 
> Nice.  That screw hole on the front of the rack ear is screaming for
> someone to make a 3D printed label tag.
> 
> On Thu, May 03, 2018 at 08:19:59AM -0500, Chris Wopat wrote:
> > Our current QFX5100 label method:
> >
> > https://i.imgur.com/kRVojXk.jpg
> >
> > We have a label on both the left and right side, sticking out as a tab on
> > left and folded over on right. in both cases the label was adhered prior to
> > putting the ears on.