[j-nsp] MX204

[Chris Kawchuk]

Here's my setup FWIW: (same as Mark's last example), broken out by MIC for clarity.

MIC 0: 100G, 100G, 4x10G, 4x10G, MIC1: 8x10G


On 15 May 2018, at 9:53 am, Eric Krichbaum <eric at telic.us> wrote:

> 3x 40G + 8x 10G
> 
> -----Original Message-----
> From: juniper-nsp <juniper-nsp-bounces at puck.nether.net> On Behalf Of Mark Tinka
> Sent: Monday, May 14, 2018 6:20 PM
> To: Tim Jackson <jackson.tim at gmail.com>; Bill Blackford <bblackford at gmail.com>
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] MX204
> 
> 
> 
> On 14/May/18 23:49, Tim Jackson wrote:
> 
>> Only kinda weird drawback is you can't use all 4x100G and the 8xSFP+ 
>> onboard. (https://apps.juniper.net/home/port-checker/)
> 
> Yes. Port combinations are:
> 
>    - 4x 100Gbps
>    - 4x 40Gbps
>    - 16x 10Gbps + 8x 10Gbps
>    - 2x 100Gbps + 16x 10Gbps
> 
> Mark.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
> 
> 
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp