[j-nsp] MX204

[Bill Blackford]

So that port config tool. It looks like I can't do 24 10g. However, I can do 20 10g and a single 100g which makes no sense to me, but then again I know nothing about the intricacies of modern ASIC design.

Sent from my iPhone

> On May 16, 2018, at 07:43, Mark Tinka <mark.tinka at seacom.mu> wrote:
> 
> 
> 
>> On 16/May/18 16:31, Luca Salvatore via juniper-nsp wrote:
>> 
>> It is feasible that we'll push more than 200Gb/s
>> Any idea what performance is like above that level?
> 
> Should be fine.
> 
> The chipset is the 3rd generation Trio EA NPU. Same one used in the
> MX10003 MPC; good for 400Gbps.
> 
> Mark.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp