[j-nsp] MX204

[Olivier Benghozi]

That port config tool sux ; but you can have 24x10g if you turn on the « per PIC» small selector.

> Le 16 mai 2018 à 18:15, Bill Blackford <bblackford at gmail.com> a écrit :
> 
> So that port config tool. It looks like I can't do 24 10g. However, I can do 20 10g and a single 100g which makes no sense to me, but then again I know nothing about the intricacies of modern ASIC design.
> 
> Sent from my iPhone
> 
>> On May 16, 2018, at 07:43, Mark Tinka <mark.tinka at seacom.mu> wrote:
>> 
>> 
>> 
>>> On 16/May/18 16:31, Luca Salvatore via juniper-nsp wrote:
>>> 
>>> It is feasible that we'll push more than 200Gb/s
>>> Any idea what performance is like above that level?
>> 
>> Should be fine.
>> 
>> The chipset is the 3rd generation Trio EA NPU. Same one used in the
>> MX10003 MPC; good for 400Gbps.
>> 
>> Mark.
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp