[j-nsp] MX80 Input Scheduling/Shaping

sthaug at nethelp.no sthaug at nethelp.no
Fri Oct 5 15:20:06 EDT 2018


> Ingress scheduling is supported only on Q and EQ MPCs - Juniper MX
> series book, 2nd ed, page 598.
> 
> MX80 COS capabilities are roughly equal to MPC1, without Q.

Disagree. MX80 does per-VLAN queuing/scheduling/shaping just fine for
ports on MICs. *Not* for the builtin 10G ports.

Steinar Haug, Nethelp consulting, sthaug at nethelp.no


More information about the juniper-nsp mailing list