[j-nsp] 6PE static route

[NK NSP]

Is there v4-mapped-v6 labeled route in inet6.3? If not, first step would be
to create that using ipv6-tunneling knob. of course there has to be a LSP
route to 1.2.3.4 in inet.3 for 1.2.3.4 for it happen. Next step, you could
try is to add a "next-table" nexthop route.

set routing-options rib inet6.0 static route ::/0 next-table inet6.3. See
if that works. The problem is static route will expect ::ffff:<blah> NH
route in inet6.0 which is not possible unless you have
traffic-engineering-bgp-igp-both-ribs knob configured. If not then you will
have to point the static route to inet6.3 table. Ofcourse, I am saying all
this theoretically, you can test to see if that works.

Thanks,


On Mon, Sep 24, 2018 at 10:10 AM serge vautour <sergervautour at gmail.com>
wrote:

> Hello,
>
> Does anyone know if it's possible to create a 6PE static default route? It
> tried creating one like this:
>
> set routing-options rib inet6.0 static route ::/0 next-hop ::ffff:1.2.3.4
> set routing-options rib inet6.0 static route ::/0 resolve
>
> I have an ISIS-SR label for 1.2.3.4 in inet3.0. When I look at ::/0 it
> shows a single label push with the same label as 1.2.3.4. However, there is
> no BGP 6PE label 2 service label. Is there a way to tell the box to add
> this?
>
> Thanks,
> Serge
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>