[j-nsp] MX10003 rack size

[Richard McGovern]

Or 100cm - yes __

Richard McGovern
Sr Sales Engineer, Juniper Networks 
978-618-3342
 
I’d rather be lucky than good, as I know I am not good
I don’t make the news, I just report it
 

On 8/7/19, 12:15 PM, "Anderson, Charles R" <cra at wpi.edu> wrote:

    1000mm deep.  APC AR3100 racks are 600mm x 1070mm.  APC also makes 1200mm deep ones, and 750mm wide ones, and both together.
    
    On Wed, Aug 07, 2019 at 04:12:26PM +0000, Richard McGovern wrote:
    > Pete "1000 deep rack"??  Is that fathoms __
    > 
    > Richard McGovern
    > Sr Sales Engineer, Juniper Networks 
    > 978-618-3342
    >  
    > I’d rather be lucky than good, as I know I am not good
    > I don’t make the news, I just report it
    >  
    > 
    > On 8/7/19, 6:20 AM, "Pete Webb" <Pete.Webb at virtual1.com> wrote:
    > 
    >     No mate,
    >     I made the same mistake.
    >     Minimum you can get away with is 1000 deep racks, and even then you have to leave the front air filter off.
    >     
    >     Pete
    >     
    >     -----Original Message-----
    >     From: juniper-nsp <juniper-nsp-bounces at puck.nether.net> On Behalf Of Sander Steffann
    >     Sent: 30 July 2019 13:32
    >     To: nanog <nanog at nanog.org>; Juniper List <juniper-nsp at puck.nether.net>
    >     Subject: [j-nsp] MX10003 rack size
    >     
    >     Hi,
    >     
    >     Has anyone ever managed to fit a Juniper MX10003 in a 90cm deep rack? Without applying power tools to either the rack or the router ;)
    >     
    >     Cheers,
    >     Sander