[j-nsp] GRE interfaces doesn't show up

[Jim Alias]

On DPCs you need to set the bandwidth setting. 

set chassis fpc <n> pic <n> tunnel-services bandwidth <10g - 100g>

Be advised that this will burn a 10 gig port for each 10 gigs you assign to tunnel-services. 

Regard,
Clay Haynes

Sent from my iPhone

> On 29 Aug 2019, at 10:50, Jeff Meyers <Jeff.Meyers at gmx.net> wrote:
> 
> Hi list,
> 
> I'm trying to setup a GRE tunnel interface on a MX480 with DPCE
> linecards. I want to use xe-5/4/0 and have therefore configured this
> interface under 'edit chassis' for tunnel-services. The interface
> vanishes as expected. I have then configured the interface gr-5/4/0 with
> unit 0 but is not being created. It's the same behaviour on a secondary
> MX router so I might be missing something. I am running Junos 13.3
> respectively 15.1 on the routers I tested this with.
> 
> I am unable to identify the reason right now, maybe someone from this
> list can help me with that? Thanks in advance!
> 
> Best
> Jeff
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp