[j-nsp] RE filter BCP

[Saku Ytti]

On Thu, 3 Jan 2019 at 22:50, Anderson, Charles R <cra at wpi.edu> wrote:

> Thanks.  I assume the same problem exists if you have VRF loopback
> interfaces inside the VPN as well (e.g. OSPF router-id loopbacks for
> the customer's VPN).  So the idea is to restrict the destinations to
> ones that will never exist inside a customer-visible VRF.

Correct. I think alternative solution is to have lo0 interface for
every VRF, I've not tested, but JunOS should consider that filter
instead of main table lo0 filter if defined.

-- 
  ++ytti