[j-nsp] VTEP Scale

[Nitzan Tzelniker]

AFAIK VTEP scale  is a lot lower  at least in EVPN-VxLAN scenario
But please ask your SE for the exact number as it is not public

Nitzan




On Thu, Sep 26, 2019 at 9:59 AM Vincent Bernat <bernat at luffy.cx> wrote:

>  ❦ 25 septembre 2019 18:19 +03, Mohammad Khalil <eng.mssk at gmail.com>:
>
> > Am working with a customer of mine for DC refresh project.
> > Per the requirements , I have been asked about VTEP scale numbers for our
> > proposed switches which I cannot find to be honest.
> > Our product is QFX5120-48Y
> >
> > Any ideas would be appreciated.
>
> You should ask Juniper, the documentation about that is (AFAIK) not
> public. On the QFX5110, there is a maximum of 16k virtual port. A
> virtual port is either a remote VTEP or a VLAN assigned to an ethernet
> switching interface. Then, you have these two settings:
>
>  <
> https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/interface-num-edit-forwarding-options.html
> >
>  <
> https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/next-hop-edit-forwarding-options-vxlan-routing.html
> >
> --
> "You have been in Afghanistan, I perceive."
>                 -- Sir Arthur Conan Doyle, "A Study in Scarlet"
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>