[j-nsp] QFX10K port shaping

[Chen Jiang]

Hi! Saku

I have tried you advice but there is no "output-traffic-control-profile"
under "class-of-service interfaces et-x/x/x" in QFX10K. different from
other Juniper gears, QFX COS configuration is very weired.

BR!

Chen Jiang

On Thu, Feb 20, 2020 at 10:03 PM Saku Ytti <saku at ytti.fi> wrote:

> Hey James,
>
> PE chip certainly  does support egress shaping and have QoS inside the
> subrate (HQoS).
>
> Try this:
>
> set class-of-service traffic-control-profiles tcp-5G scheduler-map
> YOUR_SCHEDULER
> set class-of-service traffic-control-profiles tcp-5G shaping-rate 5g
> set class-of-service interfaces et-0/0/6:1 output-traffic-control-profile
> tcp-5G
>
> Ingress shaping is not supported.
>
> On Thu, 20 Feb 2020 at 14:46, Chen Jiang <ilovebgp4 at gmail.com> wrote:
> >
> > Hi! Experts
> >
> > Sorry for disturbing, we found the "set class-of-service interfaces xxx
> > shaping-rate" is missing in QFX platform, is there any other method could
> > do port shaping ?
> >
> > Thanks for your help.
> >
> > --
> > BR!
> >
> >
> >
> >            James Chen
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
>
> --
>   ++ytti
>


-- 
BR!



           James Chen