[j-nsp] QFX10K port shaping

[Saku Ytti]

On Fri, 21 Feb 2020 at 02:48, Chen Jiang <ilovebgp4 at gmail.com> wrote:

> I have tried you advice but there is no "output-traffic-control-profile" under "class-of-service interfaces et-x/x/x" in QFX10K. different from other Juniper gears, QFX COS configuration is very weired.

This works in PTX10k and PTX1k which is 100% same PE chip, but
unfortunately the whole catalyst6500/7600 issue with different
software. So certainly something PE chip can do, but I don't have
QFX10k handy to check if this is exist in any QFX10k release. I would
either check later release in lab or ask account team.


-- 
  ++ytti