[j-nsp] MX80 upgrade path 18.4R

[Robert Hass]

Thanks for all the replies. Managed to upgrade 17 units. So I'm sharing -
my path for that upgrade:
10.4R -> 13.3R -> 15.1R -> 18.4R

Just ensured there is enough space on /var partition (remove unused files
in /var/tmp and old junos in /var/pkg/sw)

Rob

On Mon, Jun 15, 2020 at 6:41 PM Leon Kramer <leonkramer at gmail.com> wrote:

> Hi,
>
> +1 for recommending doing a backup of config, a complete reinstallation of
> the device and restore of config.
> More than once I experienced strange issues after updates or reboots which
> were entirely gone after reinstallation.
>
> Kind Regards
>
>
>
>
>
> Am So., 14. Juni 2020 um 11:02 Uhr schrieb Robert Hass <robhass at gmail.com
> >:
>
>> Hi
>> I have old MX80 running 10.4R14.2.
>> I would like to upgrade it to 18.4R.
>> But what upgrade I should use ?
>>
>> 10.4R -> 15.1R and to 18.4R ?
>>
>> Rob
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>