[j-nsp] MX960 vs MX10K

[Tom Beecher]

It really depends on what you're going to be doing,but I still have quite a
few MX960s out there running pretty significant workloads without issues.

I would suspect you hit the limits of the MS-MPCs way before the limits of
the chassis.

On Wed, Mar 4, 2020 at 6:56 AM Ibariouen Khalid <ibariouen at gmail.com> wrote:

> dear Juniper community
>
> is there any limitation of using MX960 as DC-GW compared to MX10K ?
>
> juniper always recommends to use MX10K , but i my case i need MS-MPC which
> is not supported on MX10K and i want to knwo if i will have some limitation
> on MX960.
>
> Thanks
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>