[j-nsp] MX960 vs MX10K

[Mark Tinka]

On 4/Mar/20 16:36, Tom Beecher wrote:
> It really depends on what you're going to be doing,but I still have quite a
> few MX960s out there running pretty significant workloads without issues.
>
> I would suspect you hit the limits of the MS-MPCs way before the limits of
> the chassis.

The classic MX chassis are nowhere close to running out of ideas.

But Juniper have to always be pushing the tech., so emphasis will be on
the MX1000 (although not necessarily at the expense of the MX960/480/240).

I still believe if your use-case is not overly complicated, you may find
the MX960/480 to be cheaper if you don't need 100Gbps ports.

Mark.