[j-nsp] MX960 vs MX10K
Andrey Kostin
ankost at podolsk.ru
Tue Mar 17 21:30:30 EDT 2020
Your 960 will be choked if you are going to push a decent traffic volume
through it. And circulation through backplane to and from service cards
will only make it worse.
Just imho. Your choice.
Kind regards,
Andrey Kostin
Aaron Gould писал 2020-03-09 09:18:
> In my case, 960 has a lot of slots, and I use slot 0 and slot 11 for
> MPC-7E-MRATE to light up 100 gig east/west ring and 40 gig south to ACX
> subrings, so I have plenty of slot space for my MS-MPC-128G nat
> module... If
> I place it somewhere else, then I gotta cross the network to some
> extent to
> get to it... also, my dual 100 gig inet connections are on a couple of
> those
> 960's where I colo the mpc-128g card, yeah, it's all right there. Not
> the
> case for dsl nat, that's across the network in a couple mx104's, but
> dsl
> doesn't have near the speeds that my ftth and cm subs have.
>
> -Aaron
>
More information about the juniper-nsp
mailing list