[j-nsp] MX204 port 1G

[Łukasz Trąbiński]

Hi.

It does not work. according to the documentation it must be xe-

> Wiadomość napisana przez Jackson, William <william.jackson at gibtele.com> w dniu 09.10.2020, o godz. 13:42:
> 
> Rename the interface ge-0/1/4
> 
> admin at mx1> show interfaces xe-0/1/4  
>    Physical interface: xe-0/1/4, Enabled, Physical link is Up
>      Interface index: 154, SNMP ifIndex: 530
>      Description: TEST
>      Link-level type: Ethernet, MTU: 1514, MRU: 1522, LAN-PHY mode,                    Speed: 10Gbps,
> 
> On 09/10/2020, 13:16, "juniper-nsp on behalf of Łukasz Trąbiński" <juniper-nsp-bounces at puck.nether.net on behalf of lukasz at trabinski.net> wrote:
> 
>    Hello
> 
>    In Lab I'm trying to set up 1G port on MX204.
> 
>    admin at mx1> show configuration interfaces xe-0/1/4  
>    description TEST;
>    gigether-options {
>        speed 1g;
>    }
>    unit 0 {
>        family inet {
>            address 192.168.1.138/30;
>        }
>    }
> 
>    admin at mx1> show configuration chassis fpc 0 pic 1 port 4  
>    speed 10g;
> 
>    Port is UP, but I can’t see any MAC address from remote side or I can’t ping remote side.
> 
> 
>    admin at mx1> show interfaces xe-0/1/4  
>    Physical interface: xe-0/1/4, Enabled, Physical link is Up
>      Interface index: 154, SNMP ifIndex: 530
>      Description: TEST
>      Link-level type: Ethernet, MTU: 1514, MRU: 1522, LAN-PHY mode, Speed: 10Gbps,
>      BPDU Error: None, Loop Detect PDU Error: None, MAC-REWRITE Error: None,
>      Loopback: None, Source filtering: Disabled, Flow control: Enabled,
>      Speed Configuration: 1G
> 
> 
>    Junos: 18.4R3-S5.4 but also tried on 18.4R3.3. I also setup auto-negotiation and fec options but without success. 
> 
>    SFP:
>    Xcvr 4       REV 01   740-011614   PJD2XXX           SFP-LX10
>    _______________________________________________
>    juniper-nsp mailing list juniper-nsp at puck.nether.net
>    https://puck.nether.net/mailman/listinfo/juniper-nsp
> 
>