[j-nsp] MX204 port 1G

[Jackson, William]

Rename the interface ge-0/1/4

admin at mx1> show interfaces xe-0/1/4  
    Physical interface: xe-0/1/4, Enabled, Physical link is Up
      Interface index: 154, SNMP ifIndex: 530
      Description: TEST
      Link-level type: Ethernet, MTU: 1514, MRU: 1522, LAN-PHY mode,                    Speed: 10Gbps,

On 09/10/2020, 13:16, "juniper-nsp on behalf of Łukasz Trąbiński" <juniper-nsp-bounces at puck.nether.net on behalf of lukasz at trabinski.net> wrote:

    Hello
    
    In Lab I'm trying to set up 1G port on MX204.
    
    admin at mx1> show configuration interfaces xe-0/1/4  
    description TEST;
    gigether-options {
        speed 1g;
    }
    unit 0 {
        family inet {
            address 192.168.1.138/30;
        }
    }
    
    admin at mx1> show configuration chassis fpc 0 pic 1 port 4  
    speed 10g;
    
    Port is UP, but I can’t see any MAC address from remote side or I can’t ping remote side.
    
    
    admin at mx1> show interfaces xe-0/1/4  
    Physical interface: xe-0/1/4, Enabled, Physical link is Up
      Interface index: 154, SNMP ifIndex: 530
      Description: TEST
      Link-level type: Ethernet, MTU: 1514, MRU: 1522, LAN-PHY mode, Speed: 10Gbps,
      BPDU Error: None, Loop Detect PDU Error: None, MAC-REWRITE Error: None,
      Loopback: None, Source filtering: Disabled, Flow control: Enabled,
      Speed Configuration: 1G
    
    
    Junos: 18.4R3-S5.4 but also tried on 18.4R3.3. I also setup auto-negotiation and fec options but without success. 
    
    SFP:
    Xcvr 4       REV 01   740-011614   PJD2XXX           SFP-LX10
    _______________________________________________
    juniper-nsp mailing list juniper-nsp at puck.nether.net
    https://puck.nether.net/mailman/listinfo/juniper-nsp