[j-nsp] MX204 port 1G

[Łukasz Trąbiński]

Hello

In Lab I'm trying to set up 1G port on MX204.

admin at mx1> show configuration interfaces xe-0/1/4  
description TEST;
gigether-options {
    speed 1g;
}
unit 0 {
    family inet {
        address 192.168.1.138/30;
    }
}

admin at mx1> show configuration chassis fpc 0 pic 1 port 4  
speed 10g;

Port is UP, but I can’t see any MAC address from remote side or I can’t ping remote side.


admin at mx1> show interfaces xe-0/1/4  
Physical interface: xe-0/1/4, Enabled, Physical link is Up
  Interface index: 154, SNMP ifIndex: 530
  Description: TEST
  Link-level type: Ethernet, MTU: 1514, MRU: 1522, LAN-PHY mode, Speed: 10Gbps,
  BPDU Error: None, Loop Detect PDU Error: None, MAC-REWRITE Error: None,
  Loopback: None, Source filtering: Disabled, Flow control: Enabled,
  Speed Configuration: 1G


Junos: 18.4R3-S5.4 but also tried on 18.4R3.3. I also setup auto-negotiation and fec options but without success. 

SFP:
Xcvr 4       REV 01   740-011614   PJD2XXX           SFP-LX10