[j-nsp] SRX300 Sudden Reboot

[Mohammad Khalil]

Can I use the web generated link to send the file to the SRX box?
https://cdn.juniper.net/software/junos/15.1X49-D230/junos-srxsme-15.1X49-D230-domestic.tgz?SM_USER=xxxxx@bluezonejordan.com&__gda__=1603804883_8b2ff7114f49ebd48787c32ba78d7720

On Wed, 28 Oct 2020 at 19:42, Mohammad Khalil <eng.mssk at gmail.com> wrote:

> Hi Nicolas
> The device is remote from my side so I will have to upload the image
> remotely , what is the best way to do that?
>
>
> On Mon, 26 Oct 2020 at 01:41, Nicholas Oas <nicholas.oas at gmail.com> wrote:
>
>> Yes do an upgrade, that code is ancient. Anything below 15.1X49-D150 is
>> pretty crummy. Watch out for whatever changes they made with config stanza,
>> vlans, and dhcp services. Do an upgrade within 15.1X49 first.
>>
>> Once you're past those 15.1X49 milestones its pretty solid. Stay off of
>> 17.x I'm happily on 20.3R1.8.
>>
>>
>>
>> On Sun, Oct 25, 2020 at 4:46 PM Mohammad Khalil <eng.mssk at gmail.com>
>> wrote:
>>
>>> Thanks all for the kind replies.
>>> Adding to that , the FW got hanged and I cannot access it remotely unless
>>> it is rebooted manually.
>>> It keeps working for couple of days and then it is back again to hang
>>> status.
>>> Current SW version is 15.1X49
>>>
>>> Any recommendations ? Should I do an upgrade?
>>>
>>> BR,
>>> Mohammad
>>>
>>> On Fri, 23 Oct 2020 at 01:31, <mzenarosa at dosarrest.com> wrote:
>>>
>>> > I'd check for any firmware bugs that may have been triggered and
>>> caused a
>>> > reboot.
>>> >
>>> > On Oct 22, 2020 15:22, Emille Blanc <emille at abccommunications.com>
>>> wrote:
>>> >
>>> > What was the reported reboot reason?
>>> > You will find that in 'show chassis routing-engine'
>>> >
>>> > -----Original Message-----
>>> > From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On
>>> Behalf
>>> > Of Mohammad Khalil
>>> > Sent: Thursday, October 22, 2020 3:13 PM
>>> > To: Juniper List
>>> > Subject: [j-nsp] SRX300 Sudden Reboot
>>> >
>>> > Greetings
>>> > I have SRX300 which is running normally for long time except for the
>>> last
>>> > two weeks where I have suffered from sudden reboot.
>>> > Model: srx300
>>> > Junos: 15.1X49-D70.3
>>> > JUNOS Software Release [15.1X49-D70.3]
>>> >
>>> > Nothing has been changed or added and nothing in the log messages is
>>> > related to this.
>>> > As well , no active alrams and temperature levels are fine:
>>> > tbzadmin at FW-PB-NEW# run show chassis environment
>>> > Class Item                           Status     Measurement
>>> > Temp  Routing Engine                 OK         45 degrees C / 113
>>> degrees
>>> > F
>>> >       Routing Engine CPU             OK         58 degrees C / 136
>>> degrees
>>> > F
>>> > Power Power Supply 0                 OK
>>> >
>>> > What could be the issue?
>>> >
>>> > Much appreciated.
>>> > _______________________________________________
>>> > juniper-nsp mailing list juniper-nsp at puck.nether.net
>>> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>>> >
>>> > _______________________________________________
>>> > juniper-nsp mailing list juniper-nsp at puck.nether.net
>>> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>>> >
>>> >
>>> >
>>> _______________________________________________
>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>>
>>