[j-nsp] SRX300 Sudden Reboot
Eldon Koyle
ekoyle+puck.nether.net at gmail.com
Fri Oct 30 03:01:16 EDT 2020
You should be able to use "file copy <URL> <destination>" if the device has
internet access.
You can also scp the file directly to the device or use file copy to pull
it from a management device.
The customary place to put firmware files is /var/tmp/ before installing.
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/install-software-on-srx.html
--
Eldon
On Wed, Oct 28, 2020, 11:14 Mohammad Khalil <eng.mssk at gmail.com> wrote:
> Can I use the web generated link to send the file to the SRX box?
>
> https://cdn.juniper.net/software/junos/15.1X49-D230/junos-srxsme-15.1X49-D230-domestic.tgz?SM_USER=xxxxx@bluezonejordan.com&__gda__=1603804883_8b2ff7114f49ebd48787c32ba78d7720
>
> On Wed, 28 Oct 2020 at 19:42, Mohammad Khalil <eng.mssk at gmail.com> wrote:
>
> > Hi Nicolas
> > The device is remote from my side so I will have to upload the image
> > remotely , what is the best way to do that?
> >
> >
> > On Mon, 26 Oct 2020 at 01:41, Nicholas Oas <nicholas.oas at gmail.com>
> wrote:
> >
> >> Yes do an upgrade, that code is ancient. Anything below 15.1X49-D150 is
> >> pretty crummy. Watch out for whatever changes they made with config
> stanza,
> >> vlans, and dhcp services. Do an upgrade within 15.1X49 first.
> >>
> >> Once you're past those 15.1X49 milestones its pretty solid. Stay off of
> >> 17.x I'm happily on 20.3R1.8.
> >>
> >>
> >>
> >> On Sun, Oct 25, 2020 at 4:46 PM Mohammad Khalil <eng.mssk at gmail.com>
> >> wrote:
> >>
> >>> Thanks all for the kind replies.
> >>> Adding to that , the FW got hanged and I cannot access it remotely
> unless
> >>> it is rebooted manually.
> >>> It keeps working for couple of days and then it is back again to hang
> >>> status.
> >>> Current SW version is 15.1X49
> >>>
> >>> Any recommendations ? Should I do an upgrade?
> >>>
> >>> BR,
> >>> Mohammad
> >>>
> >>> On Fri, 23 Oct 2020 at 01:31, <mzenarosa at dosarrest.com> wrote:
> >>>
> >>> > I'd check for any firmware bugs that may have been triggered and
> >>> caused a
> >>> > reboot.
> >>> >
> >>> > On Oct 22, 2020 15:22, Emille Blanc <emille at abccommunications.com>
> >>> wrote:
> >>> >
> >>> > What was the reported reboot reason?
> >>> > You will find that in 'show chassis routing-engine'
> >>> >
> >>> > -----Original Message-----
> >>> > From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On
> >>> Behalf
> >>> > Of Mohammad Khalil
> >>> > Sent: Thursday, October 22, 2020 3:13 PM
> >>> > To: Juniper List
> >>> > Subject: [j-nsp] SRX300 Sudden Reboot
> >>> >
> >>> > Greetings
> >>> > I have SRX300 which is running normally for long time except for the
> >>> last
> >>> > two weeks where I have suffered from sudden reboot.
> >>> > Model: srx300
> >>> > Junos: 15.1X49-D70.3
> >>> > JUNOS Software Release [15.1X49-D70.3]
> >>> >
> >>> > Nothing has been changed or added and nothing in the log messages is
> >>> > related to this.
> >>> > As well , no active alrams and temperature levels are fine:
> >>> > tbzadmin at FW-PB-NEW# run show chassis environment
> >>> > Class Item Status Measurement
> >>> > Temp Routing Engine OK 45 degrees C / 113
> >>> degrees
> >>> > F
> >>> > Routing Engine CPU OK 58 degrees C / 136
> >>> degrees
> >>> > F
> >>> > Power Power Supply 0 OK
> >>> >
> >>> > What could be the issue?
> >>> >
> >>> > Much appreciated.
> >>> > _______________________________________________
> >>> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> >>> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >>> >
> >>> > _______________________________________________
> >>> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> >>> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >>> >
> >>> >
> >>> >
> >>> _______________________________________________
> >>> juniper-nsp mailing list juniper-nsp at puck.nether.net
> >>> https://puck.nether.net/mailman/listinfo/juniper-nsp
> >>>
> >>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
More information about the juniper-nsp
mailing list