[j-nsp] MX204 and QSFP+ breakouts

[Ross Halliday]

Thanks to everyone who responded. I actually do have an FSbox lying around, and forgot it had a QSFP+/QSFP28 port! Chris, our modules obviously have different firmware, I'll see if I can get something from FS about this.

Thanks!

Ross


-----Original Message-----
From: juniper-nsp <juniper-nsp-bounces at puck.nether.net> On Behalf Of Chris Adams
Sent: April 30, 2021 6:50 PM
To: juniper-nsp at puck.nether.net
Subject: [EXTERNAL] Re: [j-nsp] MX204 and QSFP+ breakouts

Once upon a time, Ross Halliday <ross.halliday at wtccommunications.ca> said:
> Do FS QSFP+ breakout DACs and AOCs work on this platform? Is there some magic sauce firmware I'm too daft to find?

I've got a couple of MX204s in service since they were released with
Fiberstore 4x10G optics (reported as QSFP-PLR4-40G in JUNOS).  I haven't
had any trouble with any of them on 18.1 and 18.4 JUNOS.  No magic sauce
in use as far as I know.

-- 
Chris Adams <cma at cmadams.net>
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp