[Ndr] Winding down first rev

[Martin Hannigan]

I also built a RPi with a recursive name server and piggybacking a RIPE
atlas probe. That gives us a remote access platform and
measurements/up/down. We can lock the name server to the local ISP
allocations I suppose.

The last question I have is: Does CW have a working port with DHCP anywhere
in Dominica?



On Sun, Oct 15, 2017 at 11:43 AM, Martin Hannigan <hannigan at gmail.com>
wrote:

>
> Chris,
>
> Here's the config. I'm working on buttoning down the edge router now. I
> have the everything running from an ethernet port on my home internest
> service with a DHCP address from my provider.
>
> I have all three radios connected and reachable. Looks like the lack of
> server disable some functionality, but the rest is there. I couldn't figure
> out manual channel seperation. Of note, the AP's themselves will QoS
> connections. Maybe simpler to limit their and replace the edgemax with
> something much dumber and cheaper.
>
> I think we leave it "open" on shipping. This is not fancy by any means,
> and I'm wondering how much more we really need.
>
> !
> !
> username Cisco password 7 062506324F41
> !
> !
> bridge irb
> !
> !
> !
> interface Dot11Radio0
>  no ip address
>  !
>  ssid LIFELINE
>  !
>  antenna gain 0
>  station-role root
>  bridge-group 1
>  bridge-group 1 subscriber-loop-control
>  bridge-group 1 spanning-disabled
>  bridge-group 1 block-unknown-source
>  no bridge-group 1 source-learning
>  no bridge-group 1 unicast-flooding
> !
> interface GigabitEthernet0
>  no ip address
>  duplex auto
>  speed auto
>  bridge-group 1
>  bridge-group 1 spanning-disabled
>  no bridge-group 1 source-learning
> !
> interface BVI1
>  mac-address 649e.f38e.f718
>  ip address dhcp client-id GigabitEthernet0
>  ipv6 address dhcp
>  ipv6 address autoconfig
>  ipv6 enable
> !
> ip forward-protocol nd
> ip http server
> no ip http secure-server
> ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/
> help/eag
> !
> !
> bridge 1 route ip
> !
> !
> !
> line con 0
> line vty 0 4
>  login local
>  transport input all
> !
> end
>
>
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/ndr/attachments/20171015/37d11e77/attachment.html>