[Ndr] Winding down first rev

[Martin Hannigan]

Chris,

Here's the config. I'm working on buttoning down the edge router now. I
have the everything running from an ethernet port on my home internest
service with a DHCP address from my provider.

I have all three radios connected and reachable. Looks like the lack of
server disable some functionality, but the rest is there. I couldn't figure
out manual channel seperation. Of note, the AP's themselves will QoS
connections. Maybe simpler to limit their and replace the edgemax with
something much dumber and cheaper.

I think we leave it "open" on shipping. This is not fancy by any means, and
I'm wondering how much more we really need.

!
!
username Cisco password 7 062506324F41
!
!
bridge irb
!
!
!
interface Dot11Radio0
 no ip address
 !
 ssid LIFELINE
 !
 antenna gain 0
 station-role root
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 spanning-disabled
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
!
interface GigabitEthernet0
 no ip address
 duplex auto
 speed auto
 bridge-group 1
 bridge-group 1 spanning-disabled
 no bridge-group 1 source-learning
!
interface BVI1
 mac-address 649e.f38e.f718
 ip address dhcp client-id GigabitEthernet0
 ipv6 address dhcp
 ipv6 address autoconfig
 ipv6 enable
!
ip forward-protocol nd
ip http server
no ip http secure-server
ip http help-path
http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
!
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
 login local
 transport input all
!
end
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/ndr/attachments/20171015/8277db6e/attachment.html>