[Ndr] AP configs

[Nicholas Harland]

Anyone working with NetHope? Microsoft is involved with them as well as
Cisco, Erikson, Digicel, Facebook. From what I understand they have
installed VSAT connectivity on Dominica, St Maarten, and Antigua and are
going to be working in Puerto Rico, possibly doing a TVWS (TV White Space)
deployment.

On Thu, Sep 28, 2017 at 4:28 PM, Martin Hannigan <hannigan at gmail.com> wrote:

>
>
> First stack done #dominica.
>
> Standards:
>
> 1. removed the mac addr stickers
>
> They'll fall off in the humidity. Sharpie'd  the last six of the mac on
> the face in block letters.
>
> 2. Prep date
>
> On the bottom of the device, I noted the date it was flashed = 9/28/17
>
> 3. QA process
>
> I'm going to latch the edge router onto my cable modem, exactly how it
> might be setup somewhere, and test configs. If we get a go, I'll check mark
> the flash date and we're done.
>
> 4. I m going begging for some edge routers.
>
> I'm asking the OSI guy. I didn't see that in their inventory. If not, I'll
> buy a couple to keep us moving. Then I'll get the funding stuff going.
>
> We need a corp to blanket us for assets and spending. I was thinking I
> might ask PCH or the ISOC to do this for us.
>
> I'm going to dinner, but will be back to do more tonight. I want to finish
> at least four stacks.  Call me with any comments or questions 617-821-6079
> <(617)%20821-6079>
>
>
>
> On Thu, Sep 28, 2017 at 12:58 PM, Phillip Heller <pheller at me.com> wrote:
>
>> Still working through it, will share this evening.
>>
>> Sent from my iPhone
>>
>> > On Sep 28, 2017, at 12:46 PM, Chris Malayter <mustangthz at gmail.com>
>> wrote:
>> >
>> > That’s fantastic!
>> >
>> > Can you share the configs?
>> >
>> > -Chris
>> >
>> >> On Sep 28, 2017, at 12:41 PM, Martin Hannigan <hannigan at gmail.com>
>> wrote:
>> >>
>> >>
>> >>
>> >> Worked more last night and today. Phil came over and we sorted a bunch
>> of issues.
>> >>
>> >> We’ll be ready to ship (target) Tuesday. We have enough gear for ten
>> sites.
>> >>
>> >>
>> >>
>> >>
>> >> On Wed, Sep 27, 2017 at 16:08 Martin Hannigan <hannigan at gmail.com>
>> wrote:
>> >>
>> >> Here's what we got (thank you CM)
>> >>
>> >> https://www.cisco.com/c/en/us/td/docs/wireless/access_point/
>> 1040/quick/guide/ap1040getstart.html
>> >>
>> >> Network
>> >>
>> >> 802.11n, 300 mb/s each.
>> >>
>> >> Ethernet port, 1GE
>> >>
>> >> Hardware
>> >>
>> >> Model AIR-LAP-1041N-A-K9
>> >>
>> >> Some are new in the box. Some are used. Shipped with all the mounting
>> h/w, which was most of the weight.
>> >>
>> >> Shipping
>> >>
>> >> 1.9lbs exclusive of packaging, cabling or router
>> >>
>> >> Power Requirements (choose one)
>> >>
>> >> - DC power supply Cisco AIR-PWR-B
>> >> - PoE from a network device
>> >> - PoE power injector/hub
>> >>
>> >> Device draw appears to be 15.4w
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >> _______________________________________________
>> >> ndr mailing list
>> >> ndr at puck.nether.net
>> >> https://puck.nether.net/mailman/listinfo/ndr
>> >
>> > _______________________________________________
>> > ndr mailing list
>> > ndr at puck.nether.net
>> > https://puck.nether.net/mailman/listinfo/ndr
>> _______________________________________________
>> ndr mailing list
>> ndr at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/ndr
>>
>
>
> _______________________________________________
> ndr mailing list
> ndr at puck.nether.net
> https://puck.nether.net/mailman/listinfo/ndr
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/ndr/attachments/20170928/256fd7f3/attachment-0001.html>