[rbak-nsp] BVI (6.1.4.1p4)

[Ron Ripley]

Marcin,

I believe the BVI feature would allow you to put two or more VLANs  
into a bridge group in one context and provide a L3 interface for  
routing.  I suspect that having one VLAN appear in two or more  
contexts is probably not going to work.

IS-IS is supported for intercontext lan interfaces.



On 15-Dec-08, at 1:24 PM, Marcin Kuczera wrote:

> Jeff Tantsura wrote:
> > Hi Marcin,
> >
> > BVI meant to be a L3 interface within bridge (like cisco's SVI),  
> I'm not
> > sure I correctly understand your question?
>
> well,
> I was told, that this feature is supposed to be something better  
> than "inter-context interface".
> What I needed to have was in example to connect 2 contexts to the  
> same VLAN using one physical port.
> The same about connecting 2 contexts with each other.
> I need something that will allow OSPF to work between contexts, but  
> without external loops..
>
> Regards,
> Marcin
>
>
>
>
> >> -----Original Message-----
> >> From: redback-nsp-bounces at puck.nether.net [mailto:redback-nsp-
> >> bounces at puck.nether.net] On Behalf Of Marcin Kuczera
> >> Sent: maandag 15 december 2008 19:17
> >> To: redback-nsp at puck.nether.net
> >> Subject: [rbak-nsp] BVI (6.1.4.1p4)
> >>
> >> hello,
> >>
> >> I have no documentation for 6.1.4.1, but I would like to test BVI  
> feature.
> >> Could you please give me some example how to connect 2 context  
> with each
> >> other using BVI ?
> >>
> >> Regards,
> >> Marcin
> >> _______________________________________________
> >> redback-nsp mailing list
> >> redback-nsp at puck.nether.net
> >> https://puck.nether.net/mailman/listinfo/redback-nsp
> >
> >
>
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp



--
Ron Ripley
ripleydotnet at gmail.com