[rbak-nsp] aggregate route - how to advertise

[David Freedman]

does 

summary-address <prefix>/<mask> not-advertise

not do what you want?



------------------------------------------------
David Freedman
Group Network Engineering 
Claranet Limited
http://www.clara.net



-----Original Message-----
From: redback-nsp-bounces at puck.nether.net on behalf of Marcin Kuczera
Sent: Sun 11/23/2008 21:22
To: redback-nsp at puck.nether.net
Subject: [rbak-nsp] aggregate route - how to advertise
 
hello,

could anyone explain me how can I create an aggregate and then advertise 
it once one of the subscribers route appears ?

  interface ip-pool loopback
   ip address 89.200.231.1/32
   ip address 89.200.226.1/32 secondary
!
  interface pool multibind lastresort
   ip unnumbered ip-pool
   ip arp proxy-arp always
   ip pool 89.200.226.0/23
   ip pool 89.200.231.0/24

then, I need to advertise aggreates via ospf.

How can I do it in SEOS ?

At the moment I advertise subscriber routes, but... it's a lot of them, 
at the moment only 200 but growing quickly because we just started 
migration to PPPoE on RedBack...

Regards,
Marcin
_______________________________________________
redback-nsp mailing list
redback-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/redback-nsp

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20081123/205e64ba/attachment.html>