[rbak-nsp] Subnet mask and default gateway for CLIPS from

[Jan Botto]

Hi,

You have to use syntax /24 not 255.255.255.0 ....... We have been testing this and it works only with /something.

I will try to find for you the correct settings from radius....... But I am so sure whether they are saved.

Br, jan

-----Original Message-----
From: redback-nsp-bounces at puck.nether.net [mailto:redback-nsp-bounces at puck.nether.net] On Behalf Of ???? ?????
Sent: Friday, June 19, 2009 4:16 PM
To: redback-nsp at puck.nether.net
Subject: Re: [rbak-nsp] Subnet mask and default gateway for CLIPS from

>You will have to have all the gateway IPs on the smartedge though, for 
>routing out,  how do you plan to do this?
>
>Dave.

No, I don'n have to have all gateway IPs on the smartedge.

Nearest to redback switch, witch acts as DHCP-Relay, also acts as router for subscribers. Traffic between all clients routed by this routing switch, and ONLY internet traffic goes to RedBack. Each /24 subnet is in own VLAN, routing switch has IP in each VLAN, this IP is the default gateway for clients in this VLAN.

_______________________________________________
redback-nsp mailing list
redback-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/redback-nsp