[rbak-nsp] HowTo Send Packet-of-Disconnect/Disconnect-Messages to a RedBack SE-800

[Insan Praja SW]

On Fri, 22 May 2009 04:28:02 +0700, David Freedman  
<david.freedman at uk.clara.net> wrote:

> Are you trying to issue a CoA to an IP bound to a context which isn't  
> somedomain.net?
172.30.23.254 is the NAS/SE-800

> If you are trying to issue it directly to an IP bound to the  
> somedomain.net context then yes,
Yes

> you need to have CoA server configured in this context on port 3799 and  
> be permitted to speak to it
>
So the CoA server has to be listening or sending packet from port 3799 or  
to port 3799?

> If you are trying to use another context (i.e local only) then you must  
> have the CoA server configured
> in local context and be able to send your CoA RADIUS packet to the  
> configured port (acl permitting)
>
> As quoted before, debug commands you may find helpful are:
>
> debug aaa rad-packet
> debug aaa rad-coa
> debug aaa rad-attr
>
>
> Dave.
>
> ------------------------------------------------
> David Freedman
> Group Network Engineering
> Claranet Limited
> http://www.clara.net
>
>
>
> -----Original Message-----
> From: redback-nsp-bounces at puck.nether.net on behalf of Insan Praja SW
> Sent: Thu 5/21/2009 22:07
> To: redback-nsp at puck.nether.net
> Subject: [rbak-nsp] HowTo Send Packet-of-Disconnect/Disconnect-Messages  
> to a RedBack SE-800
> Hi List,
> I'm currently trying to send packet of disconnect/disconnect messages to  
> a
> redback from a radclient. I tried with;
> $ echo "User-Name='someuser at somedomain.net'" | /usr/local/bin/radclient  
> -c
> '1' -n '3' -r '3' -t '3' -x '172.30.23.254:3799' 'disconnect'  
> 'somesecret'
> 2>&1
>
> Results:
> radclient: no response from server for ID 32 socket 5
> Sending Disconnect-Request of id 32 to 172.30.23.254 port 3799
> User-Name = "someuser at somedomain.net"
> Sending Disconnect-Request of id 32 to 172.30.23.254 port 3799
> User-Name = "someuser at somedomain.net"
> Sending Disconnect-Request of id 32 to 172.30.23.254 port 3799
> User-Name = "someuser at somedomain.net"
>
> the somedomain.net context on SE-800 has no "radius coa server"
> configured. Do I have to configured this first?
>
> Thanks,
>
>
>
> Insan Praja SW
Thanks,


Insan Praja SW
-- 
insandotpraja(at)gmaildotcom