[rbak-nsp] Re-authorize subscriber via snmp

[serstor]

> David Freedman wrote:
>> So nothing changes between the outputs of "show subscribers active 
>> username
>> <username>" ?
>>
>> Usually, if you are going to reauthorise a user and some new 
>> attributes will
>> not be applied, they show up here.
>>
>> Is there a need to change the entire profile? Are you changing  many
>> attributes or just one?
>>
>> Dave.
>>
>>
>>
>> On 05/04/2010 14:22, "serstor" <serstor at sinet.ru> wrote:
>>
>>  
>>> HI!
>>> Which way I must  configure RedBack to make re-authorize work's via
>>> snmp.  I do snmpset -v2c -c community_word at contex Redback_IP
>>> .1.3.6.1.4.1.2352.2.27.1.1.3.7.0 s "username" . Result:
>>> SNMPv2-SMI::enterprises.2352.2.27.1.1.3.7.0 = STRING: "username". 
>>> RADIUS
>>> returns new value of Sub-Profile-Name to RedBack, but nothing 
>>> changes in
>>> active session of user.
>>> _______________________________________________
>>> redback-nsp mailing list
>>> redback-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/redback-nsp
>>>     
>>
>>
>> ------------------------------------------------
>> David Freedman Group Network Engineering
>> Claranet Limited
>> http://www.clara.net
Yes, the output of "show subscribers active username <username>" says 
that nothing changes. I'am changing one parameter - subscriber profile. 
What's wrong?