[rbak-nsp] Help me to indentify this problem!

Navin Nepali navin_n at yahoo.com
Mon Aug 9 05:03:33 EDT 2010


I didn't get any messages from the console.
 


--- On Mon, 8/9/10, Tanan Satayapiwat <tanan.satayapiwat at ericsson.com> wrote:


From: Tanan Satayapiwat <tanan.satayapiwat at ericsson.com>
Subject: RE: [rbak-nsp] Help me to indentify this problem!
To: "Navin Nepali" <navin_n at yahoo.com>, "redback-nsp at puck.nether.net" <redback-nsp at puck.nether.net>
Date: Monday, August 9, 2010, 2:28 PM



Connect to the console of Slot 7 and if it's cycling through the reboot, you may see some notable errors.
 
Tanan



From: redback-nsp-bounces at puck.nether.net [mailto:redback-nsp-bounces at puck.nether.net] On Behalf Of Navin Nepali
Sent: Monday, August 09, 2010 8:53 AM
To: redback-nsp at puck.nether.net
Subject: [rbak-nsp] Help me to indentify this problem!







Today my se800 box went down suddenly. The active XCRP3 card's status went to fail and the standby card didn't respond. I manually pulled out both cards and re-inserted. The card in Slot 7 is still in Failed state while the standby card recovered. Now the system is running from the standby card. 
 
If I do "show hardware", the slot 7's type is Unknown. So this means the card has hardware fault or still can be used?
 
 



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20100809/d805bdcc/attachment.html>


More information about the redback-nsp mailing list