[rbak-nsp] Help me to indentify this problem!

[Tanan Satayapiwat]

Connect to the console of Slot 7 and if it's cycling through the reboot, you may see some notable errors.

Tanan

________________________________
From: redback-nsp-bounces at puck.nether.net [mailto:redback-nsp-bounces at puck.nether.net] On Behalf Of Navin Nepali
Sent: Monday, August 09, 2010 8:53 AM
To: redback-nsp at puck.nether.net
Subject: [rbak-nsp] Help me to indentify this problem!

Today my se800 box went down suddenly. The active XCRP3 card's status went to fail and the standby card didn't respond. I manually pulled out both cards and re-inserted. The card in Slot 7 is still in Failed state while the standby card recovered. Now the system is running from the standby card.

If I do "show hardware", the slot 7's type is Unknown. So this means the card has hardware fault or still can be used?




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20100809/f25b34c6/attachment.html>