[rbak-nsp] Help me to indentify this problem!
Tanan Satayapiwat
tanan.satayapiwat at ericsson.com
Mon Aug 9 06:09:12 EDT 2010
"Compact Flash Test : FAILED"
Definitely need a replacement. Note that this is internal compact flash so it's not field-replacable.
Tanan
________________________________
From: Navin Nepali [mailto:navin_n at yahoo.com]
Sent: Monday, August 09, 2010 12:06 PM
To: Tanan Satayapiwat
Subject: RE: [rbak-nsp] Help me to indentify this problem!
Ok Tanan..i got some log now.
[0]Booting(2)....
Enabling L1/L2 Caches...
Reset Cause:
Power On Reset (PPC/TDM Subsystems)
Cold boot, clearing out vxWorks memory space
SCC RAM controller Initialized
PPC1: Initialized PPC1
Detected Peer XC-RP, will try to establish link....
PPC1: Polling for commands from PPC0
Monitor 0 channel 1 Voltage is 1.511 V (9AC0)
Monitor 0 channel 2 Voltage is 1.787 V (B700)
Monitor 1 channel 1 Voltage is 5.028 V (80C0)
Monitor 1 channel 2 Voltage is 3.348 V (AB80)
Monitor 1 channel 3 Voltage is 2.524 V (8140)
Monitor 1 channel 4 Voltage is 2.109 V (D800)
Monitor 0 Temp = 40.00 C (2800)
Monitor 1 Temp = 28.50 C (1C80)
ATA device not present or not responding
Reading MAC address
Backplane EEPROM MAC address 00:30:88:01:FA:4C
Welcome to SmartFirmware(tm) for Redback PowerPC Copyright (c) 1999-2005 by Redback Networks, Inc. version 1.0b1272
SmartFirmware(tm) Copyright 1996-2000 by CodeGen, Inc.
All Rights Reserved.
Executing POST
PPC0 L2 Cache Test : PASSED
Sandisk Screen Test : PASSED
Bridge Test : PASSED
PPC SDRAM Test : PASSED
SCC SDRAM Test : PASSED
Serial(16552) Test : PASSED
Ethernet Test : PASSED
ISA Bridge Test : PASSED
Forte Test : PASSED
Opus Test : PASSED
Max Test : PASSED
Bits Test : PASSED
SCC Test : PASSED
Compact Flash Test : FAILED
PC Card Test : PASSED
FAILED (1 error) Loop 1 of 1, 2010/08/09 09:51:21
POST FAILED
Auto-boot in 0 seconds - press se* to abort, CR-CR to boot:
inflating image from 7050959 bytes to
Flushing L1 D-Cache, @ 0x10000, 40591497 bytes
PPC1: PPC1 image loaded @0x10000
error: error while trying to load or boot
ok CR-CR
no such symbol "CR-CR"
error: undefined word
ok se*
no such symbol "se*"
error: undefined word
ok
ok
ok
ok
[0]Booting(2)....
Enabling L1/L2 Caches...
Reset Cause:
Power On Reset (PPC/TDM Subsystems)
Cold boot, clearing out vxWorks memory space
SCC RAM controller Initialized
PPC1: Initialized PPC1
Detected Peer XC-RP, will try to establish link....
PPC1: Polling for commands from PPC0
Monitor 0 channel 1 Voltage is 1.513 V (9B00)
Monitor 0 channel 2 Voltage is 1.787 V (B700)
Monitor 1 channel 1 Voltage is 9.988 V (FFC0)
Monitor 1 channel 2 Voltage is 4.994 V (FFC0)
Monitor 1 channel 3 Voltage is 4.994 V (FFC0)
Monitor 1 channel 4 Voltage is 2.497 V (FFC0)
Monitor 0 Temp = 39.75 C (27C0)
Monitor 1 Temp = 0.-25 C (FFFFFFC0)
ATA device not present or not responding
Reading MAC address
Backplane EEPROM MAC address 00:30:88:01:FA:4C
Welcome to SmartFirmware(tm) for Redback PowerPC Copyright (c) 1999-2005 by Redback Networks, Inc. version 1.0b1272
SmartFirmware(tm) Copyright 1996-2000 by CodeGen, Inc.
All Rights Reserved.
Executing POST
PPC0 L2 Cache Test : PASSED
Sandisk Screen Test : PASSED
Bridge Test : PASSED
PPC SDRAM Test : PASSED
SCC SDRAM Test : PASSED
Serial(16552) Test : PASSED
Ethernet Test : PASSED
ISA Bridge Test : PASSED
Forte Test : PASSED
Opus Test : PASSED
Max Test : PASSED
Bits Test : PASSED
SCC Test : PASSED
Compact Flash Test : FAILED
PC Card Test : PASSED
FAILED (1 error) Loop 1 of 1, 2010/08/09 09:54:37
POST FAILED
Auto-boot in 0 seconds - press se* to abort, CR-CR to boot:
inflating image from 7050959 bytes to
Flushing L1 D-Cache, @ 0x10000, 40591497 bytes
PPC1: PPC1 image loaded @0x10000
error: error while trying to load or boot
Seems like Compact Flash card is not working.
So how to replace it?
--- On Mon, 8/9/10, Tanan Satayapiwat <tanan.satayapiwat at ericsson.com> wrote:
From: Tanan Satayapiwat <tanan.satayapiwat at ericsson.com>
Subject: RE: [rbak-nsp] Help me to indentify this problem!
To: "Navin Nepali" <navin_n at yahoo.com>, "redback-nsp at puck.nether.net" <redback-nsp at puck.nether.net>
Date: Monday, August 9, 2010, 2:35 PM
then re-seat it and see if there is an error during boot up.
Tanan
________________________________
From: Navin Nepali [mailto:navin_n at yahoo.com]
Sent: Monday, August 09, 2010 11:04 AM
To: redback-nsp at puck.nether.net; Tanan Satayapiwat
Subject: RE: [rbak-nsp] Help me to indentify this problem!
I didn't get any messages from the console.
--- On Mon, 8/9/10, Tanan Satayapiwat <tanan.satayapiwat at ericsson.com> wrote:
From: Tanan Satayapiwat <tanan.satayapiwat at ericsson.com>
Subject: RE: [rbak-nsp] Help me to indentify this problem!
To: "Navin Nepali" <navin_n at yahoo.com>, "redback-nsp at puck.nether.net" <redback-nsp at puck.nether.net>
Date: Monday, August 9, 2010, 2:28 PM
Connect to the console of Slot 7 and if it's cycling through the reboot, you may see some notable errors.
Tanan
________________________________
From: redback-nsp-bounces at puck.nether.net [mailto:redback-nsp-bounces at puck.nether.net] On Behalf Of Navin Nepali
Sent: Monday, August 09, 2010 8:53 AM
To: redback-nsp at puck.nether.net
Subject: [rbak-nsp] Help me to indentify this problem!
Today my se800 box went down suddenly. The active XCRP3 card's status went to fail and the standby card didn't respond. I manually pulled out both cards and re-inserted. The card in Slot 7 is still in Failed state while the standby card recovered. Now the system is running from the standby card.
If I do "show hardware", the slot 7's type is Unknown. So this means the card has hardware fault or still can be used?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20100809/ede09de8/attachment-0001.html>
More information about the redback-nsp
mailing list