[rbak-nsp] Help me to indentify this problem!

Yuri Shefer shefys at gmail.com
Mon Aug 9 06:33:01 EDT 2010


Hi.

If you didn't have support contract, you can replace faulty flash and upload
SEOS to XCRP3 without any RMA procedure. Just use same size flash and follow
the instruction in troubleshooting guide.

On Mon, Aug 9, 2010 at 2:09 PM, Tanan Satayapiwat <
tanan.satayapiwat at ericsson.com> wrote:

>  "Compact Flash Test : FAILED"
>
> Definitely need a replacement. Note that this is internal compact flash so
> it's not field-replacable.
>
> Tanan
>
>  ------------------------------
> *From:* Navin Nepali [mailto:navin_n at yahoo.com]
> *Sent:* Monday, August 09, 2010 12:06 PM
> *To:* Tanan Satayapiwat
>
> *Subject:* RE: [rbak-nsp] Help me to indentify this problem!
>
>    Ok Tanan..i got some log now.
>
> [0]Booting(2)....
> Enabling L1/L2 Caches...
> Reset Cause:
>         Power On Reset (PPC/TDM Subsystems)
>
> Cold boot, clearing out vxWorks memory space
> SCC RAM controller Initialized
> PPC1: Initialized PPC1
> Detected Peer XC-RP, will try to establish link....
> PPC1: Polling for commands from PPC0
> Monitor 0 channel 1 Voltage is 1.511 V (9AC0)
> Monitor 0 channel 2 Voltage is 1.787 V (B700)
> Monitor 1 channel 1 Voltage is 5.028 V (80C0)
> Monitor 1 channel 2 Voltage is 3.348 V (AB80)
> Monitor 1 channel 3 Voltage is 2.524 V (8140)
> Monitor 1 channel 4 Voltage is 2.109 V (D800)
> Monitor 0 Temp = 40.00 C (2800)
> Monitor 1 Temp = 28.50 C (1C80)
> ATA device not present or not responding
> Reading MAC address
> Backplane EEPROM MAC address 00:30:88:01:FA:4C
> Welcome to SmartFirmware(tm) for Redback PowerPC Copyright (c) 1999-2005 by
> Redback Networks, Inc. version 1.0b1272
> SmartFirmware(tm) Copyright 1996-2000 by CodeGen, Inc.
> All Rights Reserved.
> Executing POST
>                            PPC0 L2 Cache Test : PASSED
>                           Sandisk Screen Test : PASSED
>                                   Bridge Test : PASSED
>                                PPC SDRAM Test : PASSED
>                                SCC SDRAM Test : PASSED
>                            Serial(16552) Test : PASSED
>                                 Ethernet Test : PASSED
>                               ISA Bridge Test : PASSED
>                                    Forte Test : PASSED
>                                     Opus Test : PASSED
>                                      Max Test : PASSED
>                                     Bits Test : PASSED
>                                      SCC Test : PASSED
>                            Compact Flash Test : FAILED
>                                  PC Card Test : PASSED
> FAILED (1 error) Loop 1 of 1,  2010/08/09 09:51:21
> POST FAILED
> Auto-boot in 0 seconds - press se* to abort, CR-CR to boot:
> inflating image from 7050959 bytes to
> Flushing L1 D-Cache, @ 0x10000, 40591497 bytes
> PPC1: PPC1 image loaded @0x10000
> error: error while trying to load or boot
> ok CR-CR
> no such symbol "CR-CR"
> error: undefined word
> ok se*
> no such symbol "se*"
> error: undefined word
> ok
> ok
> ok
> ok
> [0]Booting(2)....
> Enabling L1/L2 Caches...
> Reset Cause:
>         Power On Reset (PPC/TDM Subsystems)
>
> Cold boot, clearing out vxWorks memory space
> SCC RAM controller Initialized
> PPC1: Initialized PPC1
> Detected Peer XC-RP, will try to establish link....
> PPC1: Polling for commands from PPC0
> Monitor 0 channel 1 Voltage is 1.513 V (9B00)
> Monitor 0 channel 2 Voltage is 1.787 V (B700)
> Monitor 1 channel 1 Voltage is 9.988 V (FFC0)
> Monitor 1 channel 2 Voltage is 4.994 V (FFC0)
> Monitor 1 channel 3 Voltage is 4.994 V (FFC0)
> Monitor 1 channel 4 Voltage is 2.497 V (FFC0)
> Monitor 0 Temp = 39.75 C (27C0)
> Monitor 1 Temp = 0.-25 C (FFFFFFC0)
> ATA device not present or not responding
> Reading MAC address
> Backplane EEPROM MAC address 00:30:88:01:FA:4C
> Welcome to SmartFirmware(tm) for Redback PowerPC Copyright (c) 1999-2005 by
> Redback Networks, Inc. version 1.0b1272
> SmartFirmware(tm) Copyright 1996-2000 by CodeGen, Inc.
> All Rights Reserved.
> Executing POST
>                            PPC0 L2 Cache Test : PASSED
>                           Sandisk Screen Test : PASSED
>                                   Bridge Test : PASSED
>                                PPC SDRAM Test : PASSED
>                                SCC SDRAM Test : PASSED
>                            Serial(16552) Test : PASSED
>                                 Ethernet Test : PASSED
>                               ISA Bridge Test : PASSED
>                                    Forte Test : PASSED
>                                     Opus Test : PASSED
>                                      Max Test : PASSED
>                                     Bits Test : PASSED
>                                      SCC Test : PASSED
>                            Compact Flash Test : FAILED
>                                  PC Card Test : PASSED
> FAILED (1 error) Loop 1 of 1,  2010/08/09 09:54:37
> POST FAILED
> Auto-boot in 0 seconds - press se* to abort, CR-CR to boot:
> inflating image from 7050959 bytes to
> Flushing L1 D-Cache, @ 0x10000, 40591497 bytes
> PPC1: PPC1 image loaded @0x10000
> error: error while trying to load or boot
>
>
> Seems like Compact Flash card is not working.
>
> So how to replace it?
>


-- 
WBR, Yuri
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20100809/279c3fa4/attachment.html>


More information about the redback-nsp mailing list