[rbak-nsp] Help me to indentify this problem!
Marcin Kuczera
marcin at leon.pl
Mon Aug 9 06:40:51 EDT 2010
Tanan Satayapiwat wrote:
> "Compact Flash Test : FAILED"
>
> Definitely need a replacement. Note that this is internal compact flash
> so it's not field-replacable.
It IS replacable.
Just open the cover, replace 512k CF with ANY flash but:
- can not be Kingstone, SE works with Kingstone but it is extremally slow.
- best - tested is SANDISK Extreme III, any size - tested with max 8G
capacity
- need TFTP server with SEOS image
Regards,
Marcin
>
> Tanan
>
> ------------------------------------------------------------------------
> *From:* Navin Nepali [mailto:navin_n at yahoo.com]
> *Sent:* Monday, August 09, 2010 12:06 PM
> *To:* Tanan Satayapiwat
> *Subject:* RE: [rbak-nsp] Help me to indentify this problem!
>
> Ok Tanan..i got some log now.
>
> [0]Booting(2)....
> Enabling L1/L2 Caches...
> Reset Cause:
> Power On Reset (PPC/TDM Subsystems)
>
> Cold boot, clearing out vxWorks memory space
> SCC RAM controller Initialized
> PPC1: Initialized PPC1
> Detected Peer XC-RP, will try to establish link....
> PPC1: Polling for commands from PPC0
> Monitor 0 channel 1 Voltage is 1.511 V (9AC0)
> Monitor 0 channel 2 Voltage is 1.787 V (B700)
> Monitor 1 channel 1 Voltage is 5.028 V (80C0)
> Monitor 1 channel 2 Voltage is 3.348 V (AB80)
> Monitor 1 channel 3 Voltage is 2.524 V (8140)
> Monitor 1 channel 4 Voltage is 2.109 V (D800)
> Monitor 0 Temp = 40.00 C (2800)
> Monitor 1 Temp = 28.50 C (1C80)
> ATA device not present or not responding
> Reading MAC address
> Backplane EEPROM MAC address 00:30:88:01:FA:4C
> Welcome to SmartFirmware(tm) for Redback PowerPC Copyright (c) 1999-2005
> by Redback Networks, Inc. version 1.0b1272
> SmartFirmware(tm) Copyright 1996-2000 by CodeGen, Inc.
> All Rights Reserved.
> Executing POST
> PPC0 L2 Cache Test : PASSED
> Sandisk Screen Test : PASSED
> Bridge Test : PASSED
> PPC SDRAM Test : PASSED
> SCC SDRAM Test : PASSED
> Serial(16552) Test : PASSED
> Ethernet Test : PASSED
> ISA Bridge Test : PASSED
> Forte Test : PASSED
> Opus Test : PASSED
> Max Test : PASSED
> Bits Test : PASSED
> SCC Test : PASSED
> Compact Flash Test : FAILED
> PC Card Test : PASSED
> FAILED (1 error) Loop 1 of 1, 2010/08/09 09:51:21
> POST FAILED
> Auto-boot in 0 seconds - press se* to abort, CR-CR to boot:
> inflating image from 7050959 bytes to
> Flushing L1 D-Cache, @ 0x10000, 40591497 bytes
> PPC1: PPC1 image loaded @0x10000
> error: error while trying to load or boot
> ok CR-CR
> no such symbol "CR-CR"
> error: undefined word
> ok se*
> no such symbol "se*"
> error: undefined word
> ok
> ok
> ok
> ok
> [0]Booting(2)....
> Enabling L1/L2 Caches...
> Reset Cause:
> Power On Reset (PPC/TDM Subsystems)
>
> Cold boot, clearing out vxWorks memory space
> SCC RAM controller Initialized
> PPC1: Initialized PPC1
> Detected Peer XC-RP, will try to establish link....
> PPC1: Polling for commands from PPC0
> Monitor 0 channel 1 Voltage is 1.513 V (9B00)
> Monitor 0 channel 2 Voltage is 1.787 V (B700)
> Monitor 1 channel 1 Voltage is 9.988 V (FFC0)
> Monitor 1 channel 2 Voltage is 4.994 V (FFC0)
> Monitor 1 channel 3 Voltage is 4.994 V (FFC0)
> Monitor 1 channel 4 Voltage is 2.497 V (FFC0)
> Monitor 0 Temp = 39.75 C (27C0)
> Monitor 1 Temp = 0.-25 C (FFFFFFC0)
> ATA device not present or not responding
> Reading MAC address
> Backplane EEPROM MAC address 00:30:88:01:FA:4C
> Welcome to SmartFirmware(tm) for Redback PowerPC Copyright (c) 1999-2005
> by Redback Networks, Inc. version 1.0b1272
> SmartFirmware(tm) Copyright 1996-2000 by CodeGen, Inc.
> All Rights Reserved.
> Executing POST
> PPC0 L2 Cache Test : PASSED
> Sandisk Screen Test : PASSED
> Bridge Test : PASSED
> PPC SDRAM Test : PASSED
> SCC SDRAM Test : PASSED
> Serial(16552) Test : PASSED
> Ethernet Test : PASSED
> ISA Bridge Test : PASSED
> Forte Test : PASSED
> Opus Test : PASSED
> Max Test : PASSED
> Bits Test : PASSED
> SCC Test : PASSED
> Compact Flash Test : FAILED
> PC Card Test : PASSED
> FAILED (1 error) Loop 1 of 1, 2010/08/09 09:54:37
> POST FAILED
> Auto-boot in 0 seconds - press se* to abort, CR-CR to boot:
> inflating image from 7050959 bytes to
> Flushing L1 D-Cache, @ 0x10000, 40591497 bytes
> PPC1: PPC1 image loaded @0x10000
> error: error while trying to load or boot
>
>
> Seems like Compact Flash card is not working.
>
> So how to replace it?
>
>
> --- On *Mon, 8/9/10, Tanan Satayapiwat
> /<tanan.satayapiwat at ericsson.com>/* wrote:
>
>
> From: Tanan Satayapiwat <tanan.satayapiwat at ericsson.com>
> Subject: RE: [rbak-nsp] Help me to indentify this problem!
> To: "Navin Nepali" <navin_n at yahoo.com>,
> "redback-nsp at puck.nether.net" <redback-nsp at puck.nether.net>
> Date: Monday, August 9, 2010, 2:35 PM
>
> then re-seat it and see if there is an error during boot up.
>
> Tanan
>
> ------------------------------------------------------------------------
> *From:* Navin Nepali [mailto:navin_n at yahoo.com]
> *Sent:* Monday, August 09, 2010 11:04 AM
> *To:* redback-nsp at puck.nether.net; Tanan Satayapiwat
> *Subject:* RE: [rbak-nsp] Help me to indentify this problem!
>
> I didn't get any messages from the console.
>
>
>
> --- On *Mon, 8/9/10, Tanan Satayapiwat
> /<tanan.satayapiwat at ericsson.com>/* wrote:
>
>
> From: Tanan Satayapiwat <tanan.satayapiwat at ericsson.com>
> Subject: RE: [rbak-nsp] Help me to indentify this problem!
> To: "Navin Nepali" <navin_n at yahoo.com>,
> "redback-nsp at puck.nether.net" <redback-nsp at puck.nether.net>
> Date: Monday, August 9, 2010, 2:28 PM
>
> Connect to the console of Slot 7 and if it's cycling through the
> reboot, you may see some notable errors.
>
> Tanan
>
> ------------------------------------------------------------------------
> *From:* redback-nsp-bounces at puck.nether.net
> [mailto:redback-nsp-bounces at puck.nether.net] *On Behalf Of
> *Navin Nepali
> *Sent:* Monday, August 09, 2010 8:53 AM
> *To:* redback-nsp at puck.nether.net
> *Subject:* [rbak-nsp] Help me to indentify this problem!
>
> Today my se800 box went down suddenly. The active XCRP3 card's
> status went to fail and the standby card didn't respond. I
> manually pulled out both cards and re-inserted. The card in Slot
> 7 is still in Failed state while the standby card recovered. Now
> the system is running from the standby card.
>
> If I do "show hardware", the slot 7's type is Unknown. So this
> means the card has hardware fault or still can be used?
>
>
>
>
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp
More information about the redback-nsp
mailing list