[rbak-nsp] Problem with the 10G traffic card in SE800

Navin Nepali navin_n at yahoo.com
Tue Dec 7 03:27:05 EST 2010


Version:
Redback Networks SmartEdge OS Version SEOS-6.2.1.2-Release
Built by sysbuild at SWB-node14 Fri Jan 29 16:06:29 PST 2010
Copyright (C) 1998-2010, Redback Networks Inc. All rights reserved.
System Bootstrap version is PowerPC,1.0b1272
Installed minikernel version is 23
Router Up Time -   21 hours 22 minutes 34 secs

[ntc]NT-SE800#show chassis
Current platform is SE800e
 (Flags:
    A-Active Crossconnect     B-Standby Crossconnect    C-SARC Ready
    D-Default Traffic Card    E-EPPA Ready              G-Upgrading FPGA
    H-Card Admin State SHUT   I-IPPA Ready              M-FPGA Upgrade Required
    N-SONET EU Enabled        O-Card Admin State ODD    P-Coprocessor Ready
    P1-ASP1 Ready             P2-ASP2 Ready             R-Traffic Card Ready
    S-SPPA Ready              U-Card PPAs/ASP UP        W-Warm Reboot
    X-XCRP mismatch)
Slot: Configured-type           Slot: Installed-type          Initialized Flags
-------------------------------------------------------------------------------
  1 : none                        1 : none                      No
  2 : none                        2 : none                      No
  3 : 10ge-1-port                 3 : 10ge-1-port               Yes IEUDR
  4 : none                        4 : none                      No
  5 : ge3-4-port                  5 : ge3-4-port                Yes IEUR
  6 : ge3-4-port                  6 : ge3-4-port                Yes IEUR
  7 : xcrp                        7 : xcrp                      Yes A
  8 : xcrp                        8 : xcrp                      Yes B
  9 : none                        9 : none                      No
 10 : ether-12-port              10 : ether-12-port             Yes IEUR
 11 : none                       11 : none                      No
 12 : none                       12 : none                      No
 13 : none                       13 : none                      No
 14 : none                       14 : none                      No
[ntc]NT-SE800#
[ntc]NT-SE800#

[ntc]NT-SE800#show hardware

Fan Tray Status            Present
Fan(s) Status              Normal
Power Supply A Status      Normal
Power Supply B Status      Normal
Active Alarms              NONE


Slot Type                 Serial No      Rev Ver Mfg Date    Voltage  Temp
---- -------------------- -------------- --- --- ----------- -------- -------
N/A  backplane            8Y044010602694   4   4 27-JUN-2006 N/A      N/A
N/A  fan tray             9W034030602491   3   4 27-JUN-2006 N/A      N/A
3    10ge-1-port          A825G2410G0PAH  25   4 09-JUL-2010 OK       NORMAL
5    ge3-4-port           A620D250720352  20   4 23-JUN-2007 OK       NORMAL
6    ge3-4-port           A620D270720511  20   4 02-AUG-2007 OK       NORMAL
7    xcrp3                6Y71D280722196  71   4 11-JUL-2007 OK       NORMAL
8    xcrp3                6Y71D280722187  71   4 11-JUL-2007 OK       NORMAL
10   ether-12-port        7U21D130720015  21   4 29-MAR-2007 OK       NORMAL

[ntc]NT-SE800#show subscribers summary
--------------------------------------------------------------------------------
Total=24913

Type            Authenticating          Active          Disconnecting
PPP                          0               0                      0
PPPoE                        2           24909                      2
DOT1Q                        0               0                      0
CLIPs                        0               0                      0
ATM-B1483                    0               0                      0
ATM-R1483                    0               0                      0
Mobile-IP                    0               0                      0
[ntc]NT-SE800#
[ntc]NT-SE800#




--- On Mon, 12/6/10, Yuri Shefer <shefys at gmail.com> wrote:

From: Yuri Shefer <shefys at gmail.com>
Subject: Re: [rbak-nsp] Problem with the 10G traffic card in SE800
To: "Navin Nepali" <navin_n at yahoo.com>
Cc: redback-nsp at puck.nether.net
Date: Monday, December 6, 2010, 11:26 PM

Hi Navin,
How many session you have on this card? What type of card you're using? SEOS version?

On Mon, Dec 6, 2010 at 8:39 PM, Navin Nepali <navin_n at yahoo.com> wrote:


Hi!
When i tried to shift my traffic to 10G card, my all pppoe session gets stuck and i need to reboot SE800. I don;t know what's the problem. During the failure, i get these alarms. Can anyone relate what's this alarm.

 
Dec 6 16:07:03: %PPAINFRA-3-IFACE_ERROR: b418d845/0000001566/789900000:03/EPPA/EU00:Out of counters for circuit 3/1:1023:63/6/2/45710 - 0005d8ec 0009b04c 0005d458 0006a846 0006a9d0 00068370 000Dec 6 16:07:03: %PPAFWD-3-PAKIO_ERR: b41981c9/0000001566/790000000:03/EPPA/EU00: [146 dropped]: Failed to allocate counter for adjacency 0xb8b704 circuit 3/1:1023:63/6/2/45707 - 0005d8ec 0009af82 00097b50 00097b28 00000000



-- 
Best regards,
Yuri





      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20101207/a92c14e9/attachment.html>


More information about the redback-nsp mailing list