[rbak-nsp] Problem with the 10G traffic card in SE800

[Yuri Shefer]

Show output from this commands:

show configuration card 3
show circuit 3/1 summary

On Tue, Dec 7, 2010 at 11:27 AM, Navin Nepali <navin_n at yahoo.com> wrote:
>
> Version:
> Redback Networks SmartEdge OS Version SEOS-6.2.1.2-Release
> Built by sysbuild at SWB-node14 Fri Jan 29 16:06:29 PST 2010
> Copyright (C) 1998-2010, Redback Networks Inc. All rights reserved.
> System Bootstrap version is PowerPC,1.0b1272
> Installed minikernel version is 23
> Router Up Time -   21 hours 22 minutes 34 secs
>
> [ntc]NT-SE800#show chassis
> Current platform is SE800e
>  (Flags:
>     A-Active Crossconnect     B-Standby Crossconnect    C-SARC Ready
>     D-Default Traffic Card    E-EPPA Ready              G-Upgrading FPGA
>     H-Card Admin State SHUT   I-IPPA Ready              M-FPGA Upgrade Required
>     N-SONET EU Enabled        O-Card Admin State ODD    P-Coprocessor Ready
>     P1-ASP1 Ready             P2-ASP2 Ready             R-Traffic Card Ready
>     S-SPPA Ready              U-Card PPAs/ASP UP        W-Warm Reboot
>     X-XCRP mismatch)
> Slot: Configured-type           Slot: Installed-type          Initialized Flags
> -------------------------------------------------------------------------------
>   1 : none                        1 : none                      No
>   2 : none                        2 : none                      No
>   3 : 10ge-1-port                 3 : 10ge-1-port               Yes IEUDR
>   4 : none                        4 : none                      No
>   5 : ge3-4-port                  5 : ge3-4-port                Yes IEUR
>   6 : ge3-4-port                  6 : ge3-4-port                Yes IEUR
>   7 : xcrp                        7 : xcrp                      Yes A
>   8 : xcrp                        8 : xcrp                      Yes B
>   9 : none                        9 : none                      No
>  10 : ether-12-port              10 : ether-12-port             Yes IEUR
>  11 : none                       11 : none                      No
>  12 : none                       12 : none                      No
>  13 : none                       13 : none                      No
>  14 : none                       14 : none                      No
> [ntc]NT-SE800#
> [ntc]NT-SE800#
>
> [ntc]NT-SE800#show hardware
>
> Fan Tray Status            Present
> Fan(s) Status              Normal
> Power Supply A Status      Normal
> Power Supply B Status      Normal
> Active Alarms              NONE
>
>
> Slot Type                 Serial No      Rev Ver Mfg Date    Voltage  Temp
> ---- -------------------- -------------- --- --- ----------- -------- -------
> N/A  backplane            8Y044010602694   4   4 27-JUN-2006 N/A      N/A
> N/A  fan tray             9W034030602491   3   4 27-JUN-2006 N/A      N/A
> 3    10ge-1-port          A825G2410G0PAH  25   4 09-JUL-2010 OK       NORMAL
> 5    ge3-4-port           A620D250720352  20   4 23-JUN-2007 OK       NORMAL
> 6    ge3-4-port           A620D270720511  20   4 02-AUG-2007 OK       NORMAL
> 7    xcrp3                6Y71D280722196  71   4 11-JUL-2007 OK       NORMAL
> 8    xcrp3                6Y71D280722187  71   4 11-JUL-2007 OK       NORMAL
> 10   ether-12-port        7U21D130720015  21   4 29-MAR-2007 OK       NORMAL
>
> [ntc]NT-SE800#show subscribers summary
> --------------------------------------------------------------------------------
> Total=24913
>
> Type            Authenticating          Active          Disconnecting
> PPP                          0               0                      0
> PPPoE                        2           24909                      2
> DOT1Q                        0               0                      0
> CLIPs                        0               0                      0
> ATM-B1483                    0               0                      0
> ATM-R1483                    0               0                      0
> Mobile-IP                    0               0                      0
> [ntc]NT-SE800#
> [ntc]NT-SE800#
>
>

--
Best regards,
Yuri