[rbak-nsp] how to enable all ports at low-density ge-4-port card?

[Łukasz Adamczyk]

Hello,
is there any way to enable all ports at low-density ge-4-port card? By default only ports 1 and 3 are available? Is there a simple command to do that?
sh hardware card 1 detailSlot              : 1                Type              : ge-4-port
Serial No         : 8KXXXXXXXXXXXX   Hardware Rev      : 61
EEPROM id/ver     : 0x5a/4          
SysFpga rev       : 0x7              SysFpga file rev  : N/A
LimFpga rev       : 0x5              LimFpga file rev  : 0x5
FlipFpga rev      : 0xc              FlipFpga file rev : 0xc
IPPA memory       : 256 MB           EPPA memory       : 256 MB
Voltage 1.5V      : 1.506 (+0%)      Voltage 1.8V      : 1.770 (-2%)
Voltage 2.6V      : 2.607 (-1%)      Voltage 3.3V      : 3.403 (+0%)
Temperature       : NORMAL (44 C)
Card Status       : HW initialized   POD Status        : Success
ODD Status        : Not Available
Fail LED          : Off              Active LED        : On
Standby LED       : Invalid
Chass Entitlement : SE400/SE800
Ports Entitled    : 1, 3
Active Alarms     : NONE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20100714/f6f52d6e/attachment.html>