[rbak-nsp] how to enable all ports at low-density ge-4-port card?
David Freedman
david.freedman at uk.clara.net
Wed Jul 14 08:11:49 EDT 2010
I believe you can get the upgrade to high density as a license (well, you
could), which , you will need to install In the system, it didn't used to be
enforced but by now it probably is.
David.
On 14/07/2010 12:55, "Łukasz Adamczyk" <lukadam at o2.pl> wrote:
> Hello,
> is there any way to enable all ports at low-density ge-4-port card? By default
> only ports 1 and 3 are available? Is there a simple command to do that?
>
> sh hardware card 1 detail
>
> Slot : 1 Type : ge-4-port
> Serial No : 8KXXXXXXXXXXXX Hardware Rev : 61
> EEPROM id/ver : 0x5a/4
> SysFpga rev : 0x7 SysFpga file rev : N/A
> LimFpga rev : 0x5 LimFpga file rev : 0x5
> FlipFpga rev : 0xc FlipFpga file rev : 0xc
> IPPA memory : 256 MB EPPA memory : 256 MB
> Voltage 1.5V : 1.506 (+0%) Voltage 1.8V : 1.770 (-2%)
> Voltage 2.6V : 2.607 (-1%) Voltage 3.3V : 3.403 (+0%)
> Temperature : NORMAL (44 C)
> Card Status : HW initialized POD Status : Success
> ODD Status : Not Available
> Fail LED : Off Active LED : On
> Standby LED : Invalid
> Chass Entitlement : SE400/SE800
> Ports Entitled : 1, 3
> Active Alarms : NONE
>
>
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp
--
David Freedman
Group Network Engineering
david.freedman at uk.clara.net
Tel +44 (0) 20 7685 8000
Claranet Group
21 Southampton Row
London - WC1B 5HA - UK
http://www.claranet.com
Company Registration: 3152737 - Place of registration: England
All the information contained within this electronic message from Claranet
Ltd is covered by the disclaimer at http://www.claranet.co.uk/disclaimer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20100714/58a42cf7/attachment.html>
More information about the redback-nsp
mailing list