[rbak-nsp] how to enable all ports at low-density ge-4-port card?

[Matthew S. Crocker]

Call your sales team you need to buy a license for those two ports



On Jul 14, 2010, at 7:01 AM, Łukasz Adamczyk <lukadam at o2.pl> wrote:

> Hello,
> is there any way to enable all ports at low-density ge-4-port card? By default only ports 1 and 3 are available? Is there a simple command to do that?
> 
> sh hardware card 1 detail
> 
> Slot              : 1                Type              : ge-4-port
> Serial No         : 8KXXXXXXXXXXXX   Hardware Rev      : 61
> EEPROM id/ver     : 0x5a/4          
> SysFpga rev       : 0x7              SysFpga file rev  : N/A
> LimFpga rev       : 0x5              LimFpga file rev  : 0x5
> FlipFpga rev      : 0xc              FlipFpga file rev : 0xc
> IPPA memory       : 256 MB           EPPA memory       : 256 MB
> Voltage 1.5V      : 1.506 (+0%)      Voltage 1.8V      : 1.770 (-2%)
> Voltage 2.6V      : 2.607 (-1%)      Voltage 3.3V      : 3.403 (+0%)
> Temperature       : NORMAL (44 C)
> Card Status       : HW initialized   POD Status        : Success
> ODD Status        : Not Available
> Fail LED          : Off              Active LED        : On
> Standby LED       : Invalid
> Chass Entitlement : SE400/SE800
> Ports Entitled    : 1, 3
> Active Alarms     : NONE
> 
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp