[rbak-nsp] MTU Setting on port

[Richard Clayton]

My other question on the same subject is, if I set an MTU on the interface
within a context will this MTU take effect without having the same setting
on the port

Thanks
Rick

On 19 November 2010 17:53, Phou-Ngan Vannaxay <
phou-ngan.vannaxay at aptiwan.com> wrote:

> hi,
>
> See inline.
>
> Le 19 nov. 2010 à 18:26, Richard Clayton a écrit :
>
> > If I set the MTU on the physical port as follows
> >
> > port ethernet 1/1
> >  mtu 9160
> >
> > Will all the interfaces using that port automatically start using an MTU
> of 9160
> Yes
>
>
> > or do I need to also specify the MTU at interface level as well, how
> could I see the what MTU value an interface is using.
> show ip interface (in the relevant context)
>
>
> >
> > Thanks
> > Rick
> > _______________________________________________
> > redback-nsp mailing list
> > redback-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/redback-nsp
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20101119/e013eae8/attachment.html>