[rbak-nsp] MTU Setting on port

[Phou-Ngan Vannaxay]

hi,

See inline.

Le 19 nov. 2010 à 18:26, Richard Clayton a écrit :

> If I set the MTU on the physical port as follows
>  
> port ethernet 1/1
>  mtu 9160
>  
> Will all the interfaces using that port automatically start using an MTU of 9160
Yes


> or do I need to also specify the MTU at interface level as well, how could I see the what MTU value an interface is using.
show ip interface (in the relevant context)


>  
> Thanks
> Rick
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp