[rbak-nsp] MTU Setting on port

[Richard Clayton]

If I set the MTU on the physical port as follows

port ethernet 1/1
 mtu 9160

Will all the interfaces using that port automatically start using an MTU of
9160 or do I need to also specify the MTU at interface level as well, how
could I see the what MTU value an interface is using.

Thanks
Rick
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20101119/048af912/attachment.html>